Our entry-level and high-capacity hospital lifts undergo severe cycle testing. Outfitted with precision deceleration devices and bactericidal cabin designs, they are ideal for regional medical clinics and emergency centers.
Caribbean healthcare facilities mandate elevators built to survive saline corrosion, electrical instability, and severe wind events.
In Antigua and Barbuda, medical centers—ranging from the prominent Sir Lester Bird Mount St. John's Medical Centre to regional clinics in Bolans and the newly developed facilities on Barbuda—require vertical transportation units that do more than move patients. They must run uninterrupted during grid interruptions and withstand the high salinity of a tropical marine climate.
Our targeted manufacturing route for the Antigua market incorporates marine-grade 316 stainless steel, IP54-rated electrical cabinets, and advanced Automatic Rescue Devices (ARD). In the event of a power outage in St. John's, our elevator systems automatically guide the cabin to the nearest floor and release the doors safely, ensuring vulnerable patients are never trapped.
We deploy protective finishes and sealed control systems to prevent humid salt air from corroding key circuit boards and electronic relays.
Specially customized VVVF controllers resist voltage fluctuations common to small island microgrids, ensuring a long electrical operational life.
Global Locations & Logistics Nodes
Elevator Systems Installed Worldwide
Years of Direct Manufacturing Experience
CE & EN 81 Safety Compliant
Our hospital lift systems comply with international accessibility standards (EN 81-70, ASME A17.1). The technical configurations listed below are optimized for medical facilities.
| Parameter | Stretcher Lift Standard Specification | Clinical Hospital Bed Specification | High-Speed Emergency Spec |
|---|---|---|---|
| Rated Capacity | 1000 kg / 1250 kg | 1600 kg / 2000 kg | 1600 kg - 2500 kg |
| Rated Speed | 1.0 m/s – 1.6 m/s | 1.0 m/s – 1.75 m/s | 2.0 m/s – 4.0 m/s |
| Traction Machine | Permanent Magnet Synchronous Gearless (PMSM) - Energy Saving & Maintenance Free | ||
| Control System | Integrated 32-Bit Microprocessor VVVF Drive with Closed-loop Control | ||
| Door Type | Side Opening / Center Opening | Center Opening / Double-Fold Side Opening | High-speed Center Opening (Bactericidal Coating) |
| Clear Opening Size | Min: 900mm x 2100mm | Standard: 1200mm x 2100mm | Customizable to 1400mm x 2300mm |
| Cab Internals | AISI 304/316 Stainless Steel, Antibacterial Wall Coatings, UV-C Disinfection, Handrails, Braille COP | ||
| Emergency Safeguard | Automatic Rescue Device (ARD) with Emergency Power Supply (UPS) | ||
From outdoor observation glass designs to custom-size shafts, these systems accommodate specialized architectural requirements in health centers.
Purchasing elevators for construction projects in Antigua & Barbuda requires managing maritime transport timelines and custom compliance. Ascom Elevator provides pre-engineered packages optimized for export, minimizing onsite installation times and transit delays.
By centralizing manufacturing in our high-tech Chinese factories—which incorporate Fuji technology frameworks and modern precision robotics—we control everything from structural component quality to shipping container stabilization. Every elevator system undergoes pre-shipment tests in our vertical testing towers to ensure rapid installation upon arrival at the Port of St. John's.
Ascom Elevator is a professional Elevators Manufacturer and Supplier in China, incorporating Fuji Lifts & Elevators technology. Our systems cover Passenger Elevators, Home Elevators, Sightseeing Elevators, Cargo Elevators, Escalators, and specialized Medical Lifts.
Engineered to Order
Custom Lifts Built to Your Architectural Needs
Global Compliance
Certified in over 50 countries, matching European Standards (CE, EN 81)
Clinical cabins incorporate nanosilver antibacterial finishes and active UV-C sterilization systems that run during idle periods, maintaining clean internal air quality.
One-touch emergency medical service (EMS) priority override ensures staff can claim control of the lift car directly from any floor during critical care scenarios.
Optional real-time data connections let facility managers track lift health, motor temperatures, and mechanical fatigue metrics, helping identify maintenance needs early.
Our hospital lift configurations feature smooth start-stop deceleration, variable-frequency door systems, and dimensions built to accommodate standard stretcher sizes.
Our service continues after the shipping container arrives in St. John's. We provide structural design assistance, remote engineering support during installation, and long-term maintenance programs.
Our engineering team creates custom structural drawings matching your building's lift shaft dimensions, concrete tolerances, overhead height, and pit depth.
We supply detailed installation documentation, wiring layout diagrams, and remote video guidance to help local mechanical and electrical contractors complete the installation.
We maintain stock of critical replacement parts (including door contacts, guide shoes, and VVVF controller boards) to ensure rapid air-freight delivery to Antigua when needed.
Under EN 81-70 standards, a standard medical stretcher lift requires a minimum load capacity of 1000 kg, with interior cabin dimensions of at least 1100 mm (width) x 2100 mm (depth) to clear standard hospital stretchers. For larger beds with clinical attachment poles and life-support equipment, we recommend a 1600 kg or 2000 kg configuration, providing a cabin width of 1400 mm and a depth of 2400 mm.
We configure our coastal builds with marine-grade AISI 316 stainless steel for the cabin panels, door jambs, and control fixtures. Crucial electronic units and VVVF motor controllers are housed in IP54-rated cabinets, and circuit board surfaces receive a protective conformal coating to guard against humidity and salt-induced oxidation.
Our installations feature an Automatic Rescue Device (ARD) powered by a dedicated battery backup. During a grid failure, the ARD activates within seconds, bringing the elevator car safely to the nearest landing floor and opening the doors to allow patients to exit. We also install heavy-duty line reactors and voltage stabilizers to filter power spikes.
All our medical passenger and bed lifts are designed, manufactured, and tested to meet European EN 81-20/50 regulations and hold CE certification. We also offer configurations compliant with ASME A17.1 safety codes for projects requiring American standard design rules.
Yes. While standard hospital elevators run at 1.0 m/s to 1.75 m/s to ensure gentle patient transport, we manufacture high-speed configurations up to 2.5 m/s or 4.0 m/s for larger multi-story medical institutions. These systems utilize advanced acceleration and deceleration profiling to prevent changes in cabin G-forces that could disturb patients.
Get in touch with our engineering team for custom drawings, pricing details, and logistics options for the Antigua and Barbuda market.
Ascom Elevator
